You have no items in your shopping cart.

You have no items to compare.


Worbla's Crystal Art


Buy any 3 POSTERS for a special price of €25

Worbla's Crystal Art 100g

Be the first to review this product


In stock

Worbla's Crystal Art pallets – the thermoplastic & modelling material!




Worbla’s® Crystal Art (WCA) – the transparent thermoplastic pearls for filigree casting and emblazed treasures!

Like all the products of the Worbla’s® Art Series it is declared to be non-toxic and solvent-free. Worbla’s® Crystal Art is not as hard as regular plastics are. It stays a little softer and flexible.
The material is activated by heat (best approx. 110°C / 230°F) using a heat gun, hardens after about 10 minutes while staying transparent and can be reactivated at any time! It is strongly advised wearing heat resistant gloves while working with it!

This product is very easy to handle: Put some of the WCA pearls into a bin (e.g. baking paper or a silicone mould) and use a heat gun for activation. After the pearls became sticky and soft you can use e.g. silicone moulds and others or modelling tools for creating all different kind of fantastic things (remember: heat protection!) It contains glue and sticks very well to itself and to other products of the Worbla’s® Art Series.

Acrylic, spray-paint, mirror colours or iDyePoly (Jacquard Products) can be used for coloring the WCA’s surface. Glitter or water-based body paint can be kneaded with the material while it is activated.
Using iDyePoly you can even dye the pearls themselves: Put the WCA into a metal wire (no plastic!) and dip them into the hot water containing the dye - after some minutes you can reactivate and use the dyed pearls without any mess because the dye stays inside the material even while activated.
This means using the Worbla’s® Crystal Art you can fabricate extremely filigree surfaces which are flexible but inherently stable and might be wonderfully emblazed.

Tips: Heating its surface with a “Brûlée“ torch or a flare match for a second makes dull spots shiny again – surely clear lacquer works as well! Do not knead the Worbla’s® Crystal Art too much, this produces air bubbles. To get mostly rid of them again, place the activated material between baking paper and use a rolling pin.

Do you want to know more? Universal Worbla Academy for many more pictures, info and tutorials!


• Non-toxic, solvent-free and contains no hazardous substances
• Product stays transparent and “rubber-like” after hardening
• Works perfectly with moulds (e.g. silicone and duroplastic plastics) and can be modelled free-handed
• Simple, safe (remember: heat protection!) and clean handling, also for beginners
• Can be reactivated with heat any time (best approx. 110°C / 230°F)
• Can be dyed directly or colored afterwards
• Processing time up to several minutes, depending on the time of exposure of the heat
• Contains a heat-activated glue
• Leftovers can be re-used and under normal conditions it can be stored for years


Product Tags

  • No tags connected to product

Use spaces to separate tags. Use single quotes (') for phrases.


  1. Be the first to review this product


Write Your Own Review

You're reviewing: Worbla's Crystal Art 100g

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Complexity (1star - difficult, 5 stars - easy)
Accuracy (1 star - does not resemble, 5 stars - very accurate)
Would you reccomend?
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.